In the past few months, I have received a lot of feedback about the lamp. For these, I would like to say thank you! Most constructive criticisms affected the size and weight of the lamp so I wanted to improve these parameters first. After many designs and working hours, the diameter of the second prototype was reduced by 8 mm and its length by 20 mm. This reduction in size will naturally also affect the weight of the lamp, according to my calculations, a reduction of about 30% is expected. I say it is expected because the exact mass can be measured only when the prototype is ready, after the solidification of the resin.
The prototype will be ready at the end of the week, visit the page regulary for further information!
